Installation
All purchases from our UK Garden Buildings range include free installation as standard. Your building will be assembled by an expert team of in-house fitters who are equipped with all the skills, tools, and experience needed to ensure the build goes as smoothly as possible. The fitting team are generally on site for 1-3 days depending on the size and complexity of your design, and can advise on appropriate electrical and plumbing work schedules to fit in with the build.
Lead Times
UK Garden Buildings lead times vary across the year, but typically range from around 9-12 weeks. Please note this is a general guide for planning purposes only, for case-specific delivery timeframe estimates, please contact us.
Access Requirements
For successful delivery and installation of an order from UK Garden Buildings to take place, the following access requirements must be met:
- The customer is responsible for ensuring there is ample parking for our vehicle(s) on the day of delivery and installation, and provide any parking permits required for the correct vehicle type.
- Please be aware that we need access to power - if there is no access then we must be informed prior to delivery to enable us to hire a generator. The cost of this will be passed on to the customer.
- The customer will agree clear access to the height of 8ft (2.4m) is available from where the delivery vehicle is parked, to the location of the installation (base). We must be informed of any height restrictions in carrying the sections to the site.
- Under no circumstances will components be carried over garage roofs, fences, hedges, walls, etc. Carrying of the sections by our fitters should be kept to a minimum; please inform us if there is a considerable distance involved.
- Painted and Cedar buildings require a gap of at least 1 foot (0.3m) around the entire circumference of the building. This is to ensure the installation team have room to work, and so that each wall can be accessed to reapply treatments.
- Composite / Fluted Composite buildings require a gap of at least 2 feet (0.6m) around the entire circumference of the building. This larger gap is necessary as our installers clad these buildings on site.
