Search our site

close
Skip to content

Pergola Kits - Various sizes available

Original price £0.00 - Original price £0.00
Original price
£0.00
£0.00 - £0.00
Current price £0.00
  • Quality Smooth Faced Redwood 100 x 100 (95 x 95 actual) treated posts
  • 2 Notched railings with chamfered ends
  • Notched runners with chamfered ends (amount depends on size)
  • Width & Depth are the sizes shown to the end of the rails! Please note that the posts are approx. 400mm in from the ends
  • Height is approx. 2400mm from base plate to top of pergola.
  • All fixing screws, base plates and bolts included
  • Drill bits included for either wood or concrete and a pilot drill for fixing timbers. PZ2 bit and holder for fixing screws. All you need is a drill
  • We will not be beaten on price like for like
  • Deliveries are free to many areas, please enquire
  • Pressure Treated / Tanalised
  • Hand Sorted for Quality
  • VAT at 20% is included in selling price
  • 15 year Guarantee against rot
  • FREE no obligation quotes
  • Many sizes available...
  • Roof covering not included
  • Deliveries are dispatched within 1-10 working days but they are a guideline only and when we are busy can take up to 4 weeks.


HOW TO INSTALL YOUR PERGOLA

  • Fix metal base plates to bottom of posts with 4no 3” silver screws
  • Posts are handed so they are notched at two different levels. The side rail with multiple notches joins onto the side of the post with the deepest notch. Lay posts approx. 3m apart and fix a side rail onto the deepest notch with the end groove of the rail in line with the higher groove. This is so when you start inserting the runners the end ones sit tight against the post. Once positioned use the small 6mm drill to pilot hole the rail and use 2no 3” screws to fix in place
  • Repeat the process with the other side.
  • Stand two posts up (side rail to the outside) and fix in place using either the wood bit or concrete bit to drill into your deck or concrete pad. Fix 1 bolt and a washer in each base plate. This is a two man job or better with 3!
  • DO NOT BOLT DOWN THE TWO POSTS FULLY YET!
  • Now place opposite the other two posts and rail and start inserting the runners and fix in place by drilling a pilot hole then use the 3" silver screw's to hold in place.
  • There are two wood diagonal to go at each corner. Pre drill approx. 1” from each end and fix in place using 1no gold screw. They also help square up the posts and keep the pergola/lean to more stable.
  • At this point measure corner to corner to get structure squared up. Using a spirit level straighten the posts.
  • If you are happy that all is lined up to your satisfaction you can now go crazy and fit all bolts and washers.